 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| WTE POWER SEMICONDUCTORS ER2A - ER2J 2.0A SURFACE MOUNT SUPER FAST RECTIFIER Features ! ! ! ! ! ! ! Glass Passivated Die Construction Ideally Suited for Automatic Assembly B Low Forward Voltage Drop, High Efficiency Surge Overload Rating to 50A Peak Low Power Loss A Super-Fast Recovery Time F Plastic Case Material has UL Flammability Classification Rating 94V-O C H G E SMB/DO-214AA Dim Min Max A 3.30 3.94 B 4.06 4.70 C 1.91 2.11 D 0.152 0.305 E 5.08 5.59 F 2.13 2.44 G 0.051 0.203 H 0.76 1.27 All Dimensions in mm D Mechanical Data ! ! ! ! ! Case: Low Profile Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.093 grams (approx.) Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 110C Symbol VRRM VRWM VR VR(RMS) IO ER2A @TA=25C unless otherwise specified ER2B ER2C ER2D ER2E ER2G ER2J Unit 50 35 100 70 150 105 200 140 2.0 300 210 400 280 600 420 V V A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage Peak Reverse Current At Rated DC Blocking Voltage Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range @IF = 2.0A @TA = 25C @TA = 100C IFSM VFM IRM trr Cj RJL Tj, TSTG 0.95 50 1.25 5.0 500 35 25 20 -65 to +150 1.7 A V A nS pF K/W C Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. ER2A - ER2J 1 of 3 (c) 2002 Won-Top Electronics I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 2.0 IF, INSTANTANEOUS FORWARD CURRENT (A) 2.5 10 ER2A - ER2D ER2E - ER2G 2.0 1.5 1.0 ER2J 1.0 0.5 Single phase half-wave 60 Hz resistive or inductive load 0 25 0.01 0.6 0.8 1.0 Tj = 25C Pulse width = 300s 50 75 100 125 150 175 200 1.2 1.4 TL , LEAD TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 60 IFSM, PEAK FORWARD SURGE CURRENT (A) 100 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics Tj = 25C f = 1.0MHz 40 Cj, CAPACITANCE (pF) 10 20 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 50 NI (Non-inductive) Device Under Test 50V DC Approx 10 NI 100 (-) Pulse Generator (Note 2) (+) 0A -0.25A (-) 1.0 NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0M, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit ER2A - ER2J 2 of 3 (c) 2002 Won-Top Electronics ORDERING INFORMATION Product No.! ER2A-T1 ER2A-T3 ER2B-T1 ER2B-T3 ER2C-T1 ER2C-T3 ER2D-T1 ER2D-T3 ER2E-T1 ER2E-T3 ER2G-T1 ER2G-T3 ER2J-T1 ER2J-T3 Package Type SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB SMB Shipping Quantity 500/Tape & Reel 3000/Tape & Reel 500/Tape & Reel 3000/Tape & Reel 500/Tape & Reel 3000/Tape & Reel 500/Tape & Reel 3000/Tape & Reel 500/Tape & Reel 3000/Tape & Reel 500/Tape & Reel 3000/Tape & Reel 500/Tape & Reel 3000/Tape & Reel Products listed in bold are WTE Preferred devices. ! T1 suffix refers to a 7" reel. T3 suffix refers to a 13" reel. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. RECOMMENDED FOOTPRINT 0.050 MIN (1.27 MIN) 0.082 MIN (2.10 MIN) 0.106 MAX (2.69 MAX) inches(mm) Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. (c) 2002 Won-Top Electronics ER2A - ER2J 3 of 3 |
Price & Availability of ER2A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |